Halco Before & After Photos

This homeowner has hopes to finish this attic into usable space. After performing an energy evaluation, we realized there were a lot of leaks causing uncomfortable temperatures and expensive energy waste! We used spray foam insulation along the ceiling and gable ends. Now the homeowner has a more comfortable attic, already air sealed and insulated- it's ready to be finished!

This is one of two air-source heat pumps installed for a Hector, NY customer. The heat pumps installed in this home are ductless split systems that, like air conditioners, have compressors and coils that the can evaporate and condense refrigerant. Unlike air conditioners, they are designed so you can reverse the cooling cycle, and move heat from the outside to the inside of your home. Air-source heat pumps have become a popular retrofit system for households that have non-ducted heating systems in place. All noisy components are outside of the living space and the customer's windows remain unobstructed.

This Clifton Springs, NY customer contacted Halco for an estimate on replacing his very old steam boiler. After properly sizing a new system, we installed a natural gas steam boiler that included a prefabbed riser, header and hartford loop. An automatic water feed was also included in this installation. 

This Clifton Springs customer was having intermittent issues with his water due to an old pressure tank with a bad relay switch.  We removed the old tank and 4-feet of galvanized piping and installed a new v100 tank with pex piped in.

This Willard, NY customer needed a line ran from her electrical panel to her new electric dryer, so she contacted Halco for assistance. Because the customer's existing panel was full, Halco technicians gave her the option of installing a new box or adding a sub panel. Installing a sub panel would require tandem breakers and because the customer had a significant amount of tandem breakers already, this was not the best option. The customer chose to have us upgrade her panel to a new, 30 space 100 amp panel and now she is fully functioning and up to code!