Solar Power Before & After Photos

This Oswego, NY customer decided to go solar to offset her electricity usage from the local utility provider.  As designed, this 4.86 kW solar electric system should generate 5,085 kwh per year.  This corresponds to a CO2 emissions savings of 6,102 lbs. per year (the equivalent to CO2 emissions from 3,766 pounds of coal burned)!  The energy produced by this system is equivalent to 107% of the customer's current base load usage! 

This 10.53kW solar electric system was installed in Jamesville, NY. The customer's father went solar in the 1970's and now the customer aspires to go net zero with an expanded solar array. This solar electric system was installed as a roof-mounted array of thirty-nine SolarWorld solar modules and is designed to generate 10,482 kWh per year, for an average of 28.7 kWh per day. This corresponds to a CO2 emissions savings of 13,119 lbs per year!

With a pole-mounted solar array and geothermal heating installed by Halco a few years back, this loyal Blossvale, NY is at it again! Expanding on his dedication to producing clean, reliable energy, our solar crew has paired with this customer to add a 6.54 kW roof-mounted solar array to the garage roof.  The design consists of 20 SunPower solar panels and should produce approximately 5,978.5 kWh per year, where production is both weather and seasonally dependent. This customer is doing his part in ensuring his home is producing just as much as it's consuming! 

A Poland, NY customer decided to go solar to increase efficiency and lower electricity costs.  Halco technicians installed a 7.56kW roof mount that will generate 7911 kWh per year. Overall, the system’s energy production is equivalent to 110% of the customer’s current usage and will reduce CO2 emissions by 9493.2 lbs. per year.  This customer now has a clean, reliable system and no longer has to worry about rising energy rates!

We met this customer at a local home show, where they expressed interest in having a solar PV system installed to supplement their existing electrical energy.  To accommodate their needs, we designed this 10-panel, 3.3kW roof-mounted SunPower system that will provide up to almost 50% of their electricity, based on their current usage!